Abbey Predator Maintenance Gas 144a 270ml for Gel Blasters

Storage

Abbey Maintenance Gas is low pressure and filled with our suspended lubricant. The lubricant stays dissolved in the gas and constantly nourishes the o-rings and seals within the magazine, regardless of whether your store it upside-down or on its side. The gas prevents your magazines from drying out and developing a leak during storage.  Note:  Great idea to leave a small amount of gas in your mag when once finished using it and in storage to keep your o-rings lubed up.

 

Maintenance

If you’re constantly using a dry gas, like our Sniper Gas, or raw propane, you will need to occasionally self-lubricate the o-rings between uses. This can be a laborious process and you’re not always guaranteed to lubricate 100% of the seals and o-rings. Our Maintenance Gas has the lubricant dissolved in the Gas, anywhere the gas goes, so does the lubricant. This means it’s the perfect gas to re-lubricate and seal internal o-rings, valves and seals within gas magazines.

Repair

If you’re already suffering from a magazine that leaks, there’s a good chance that it’s because the o-rings have dried and are no-longer holding their seal properly. Maintenance Gas works its way to these o-rings and nourishes them with oil, causing them to re-seal. A quick and simple way of bringing your Gel blasters back to life.